Now free download!
If you like them, donations are welcome as I might make more plugins.
Isc Plasma1 Version: 3.0 Build 0879 ID: iz0e Parameters: 12 Inputs: System: PC Only
Extra wild plasma effect. It generates a high contrast plasma and this is influenced by the video input. A more subtle output can be achieved using the last Blend parameter and blending it wet/dry with the input. Higher or lower values than the middle of New in 3.0: - 4K and 8K support for higher quality rendering (requires 32GB or more system RAM). -
Parameters:
1.
Freq Temp
Frequency temperature. Controls the detail level of the plasma - increasing this to max gives a "bigger" wobbling plasma. Reducing it gives smaller wobbles. This parameter is like a zoom parameter.
Frequency temperature. Controls the detail level of the plasma - increasing this to max gives a "bigger" wobbling plasma. Reducing it gives smaller wobbles. This parameter is like a zoom parameter.
2.
Rot Step 1
The first of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
The first of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
3.
Rot Step 2
The second of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
The second of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
4.
Rot Step 3
The last of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
The last of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
5.
Mul1
Multiplication parameter - try this for variating the plasma shape.
Multiplication parameter - try this for variating the plasma shape.
6.
Mul2
Multiplication parameter - try this for variating the plasma shape.
Multiplication parameter - try this for variating the plasma shape.
7.
Mul3
Multiplication parameter - try this for variating the plasma shape.
Multiplication parameter - try this for variating the plasma shape.
8.
Zoom Offs X
Zoom offset horizontally (x axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
Zoom offset horizontally (x axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
9.
Zoom Offs Y
Zoom offset vertically (y axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
Zoom offset vertically (y axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
10.
Sin Mods
Lets you choose from 4 slightly different types of plasma effect.
Lets you choose from 4 slightly different types of plasma effect.
11.
FX Amount
Dry/Wet mix for the effect. Mix the input with the output gradually. Default is min, which gives only output.
Dry/Wet mix for the effect. Mix the input with the output gradually. Default is min, which gives only output.
12.
Limit
Controls limiting (off/on) when the plasma is added to the input, if color exceeds max: cap or loop it.
Controls limiting (off/on) when the plasma is added to the input, if color exceeds max: cap or loop it.
Isc
Plasma1A
Version:
3.0
Build 0859
ID:
iw31
Parameters:
13
Inputs:
System:
PC Only
Extra wild plasma effect. It generates a high contrast plasma and this is influenced by the video input. A more subtle output can be achieved using the last Blend parameter and blending it wet/dry with the input. Higher or lower values than the middle of New in 3.0: - 4K and 8K support for higher quality rendering (requires 32GB or more system RAM). - Alpha (transparency) processing.
Parameters:
Extra wild plasma effect. It generates a high contrast plasma and this is influenced by the video input. A more subtle output can be achieved using the last Blend parameter and blending it wet/dry with the input. Higher or lower values than the middle of New in 3.0: - 4K and 8K support for higher quality rendering (requires 32GB or more system RAM). - Alpha (transparency) processing.
Parameters:
1.
Freq Temp
Frequency temperature. Controls the detail level of the plasma - increasing this to max gives a "bigger" wobbling plasma. Reducing it gives smaller wobbles. This parameter is like a zoom parameter.
Frequency temperature. Controls the detail level of the plasma - increasing this to max gives a "bigger" wobbling plasma. Reducing it gives smaller wobbles. This parameter is like a zoom parameter.
2.
Rot Step 1
The first of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
The first of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
3.
Rot Step 2
The second of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
The second of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
4.
Rot Step 3
The last of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
The last of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
5.
Mul1
Multiplication parameter - try this for variating the plasma shape.
Multiplication parameter - try this for variating the plasma shape.
6.
Mul2
Multiplication parameter - try this for variating the plasma shape.
Multiplication parameter - try this for variating the plasma shape.
7.
Mul3
Multiplication parameter - try this for variating the plasma shape.
Multiplication parameter - try this for variating the plasma shape.
8.
Zoom Offs X
Zoom offset horizontally (x axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
Zoom offset horizontally (x axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
9.
Zoom Offs Y
Zoom offset vertically (y axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
Zoom offset vertically (y axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
10.
Sin Mods
Lets you choose from 4 slightly different types of plasma effect.
Lets you choose from 4 slightly different types of plasma effect.
11.
Limit
Controls limiting (off/on) when the plasma is added to the input, if color exceeds max: cap or loop it.
Controls limiting (off/on) when the plasma is added to the input, if color exceeds max: cap or loop it.
12.
Enable Alpha
Enable alpha adjustments or not.
Enable alpha adjustments or not.
13.
FX Amount
Mix of wet/dry. Default = full effect.
Mix of wet/dry. Default = full effect.
Isc Plasma2 Version: 3.0 Build 0872 ID: iz0f Parameters: 11 Inputs: System: PC Only
A slightly more subtle plasma effect. It generates a smooth plasma and this is influenced by the video input. A even smoother output can be achieved using the last Blend parameter and blending it wet/dry with the input. Higher or lower values than the mid New in 3.0: - 4K and 8K support for higher quality rendering (requires 32GB or more system RAM). -
Parameters:
1.
Freq Temp
Frequency temperature. Controls the detail level of the plasma - increasing this to max gives a "bigger" wobbling plasma. Reducing it gives smaller wobbles. This parameter is like a zoom parameter.
Frequency temperature. Controls the detail level of the plasma - increasing this to max gives a "bigger" wobbling plasma. Reducing it gives smaller wobbles. This parameter is like a zoom parameter.
2.
Rot Step 1
The first of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
The first of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
3.
Rot Step 2
The second of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
The second of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
4.
Rot Step 3
The last of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
The last of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
5.
Mul1
Multiplication parameter - try this for variating the plasma shape.
Multiplication parameter - try this for variating the plasma shape.
6.
Mul2
Multiplication parameter - try this for variating the plasma shape.
Multiplication parameter - try this for variating the plasma shape.
7.
Mul3
Multiplication parameter - try this for variating the plasma shape.
Multiplication parameter - try this for variating the plasma shape.
8.
Zoom Offs X
Zoom offset horizontally (x axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
Zoom offset horizontally (x axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
9.
Zoom Offs Y
Zoom offset vertically (y axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
Zoom offset vertically (y axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
10.
Sin Mods
Lets you choose from 4 slightly different types of plasma effect.
Lets you choose from 4 slightly different types of plasma effect.
11.
FX Amount
Dry/Wet mix for the effect. Mix the input with the output gradually. Default is min, which gives only output.
Dry/Wet mix for the effect. Mix the input with the output gradually. Default is min, which gives only output.
Isc
Plasma2A
Version:
3.0
Build 0867
ID:
iw23
Parameters:
12
Inputs:
System:
PC Only
A slightly more subtle plasma effect. It generates a smooth plasma and this is influenced by the video input. A even smoother output can be achieved using the last Blend parameter and blending it wet/dry with the input. Higher or lower values than the mid New in 3.0: - 4K and 8K support for higher quality rendering (requires 32GB or more system RAM). - Alpha (transparency) processing.
Parameters:
A slightly more subtle plasma effect. It generates a smooth plasma and this is influenced by the video input. A even smoother output can be achieved using the last Blend parameter and blending it wet/dry with the input. Higher or lower values than the mid New in 3.0: - 4K and 8K support for higher quality rendering (requires 32GB or more system RAM). - Alpha (transparency) processing.
Parameters:
1.
Freq Temp
Frequency temperature. Controls the detail level of the plasma - increasing this to max gives a "bigger" wobbling plasma. Reducing it gives smaller wobbles. This parameter is like a zoom parameter.
Frequency temperature. Controls the detail level of the plasma - increasing this to max gives a "bigger" wobbling plasma. Reducing it gives smaller wobbles. This parameter is like a zoom parameter.
2.
Rot Step 1
The first of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
The first of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
3.
Rot Step 2
The second of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
The second of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
4.
Rot Step 3
The last of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
The last of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
5.
Mul1
Multiplication parameter - try this for variating the plasma shape.
Multiplication parameter - try this for variating the plasma shape.
6.
Mul2
Multiplication parameter - try this for variating the plasma shape.
Multiplication parameter - try this for variating the plasma shape.
7.
Mul3
Multiplication parameter - try this for variating the plasma shape.
Multiplication parameter - try this for variating the plasma shape.
8.
Zoom Offs X
Zoom offset horizontally (x axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
Zoom offset horizontally (x axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
9.
Zoom Offs Y
Zoom offset vertically (y axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
Zoom offset vertically (y axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
10.
Sin Mods
Lets you choose from 4 slightly different types of plasma effect.
Lets you choose from 4 slightly different types of plasma effect.
11.
Enable Alpha
Enable alpha adjustments or not.
Enable alpha adjustments or not.
12.
FX Amount
Mix of wet/dry. Default = full effect.
Mix of wet/dry. Default = full effect.
Isc Plasma3 Version: 3.0 Build 0877 ID: iz0g Parameters: 11 Inputs: System: PC Only
A plasma effect much like IscPlasma2 but with added influence of "difference" from the video input. It generates a plasma that is highly influenced by the video input. A even smoother output can be achieved using the last Blend parameter and blending it w New in 3.0: - 4K and 8K support for higher quality rendering (requires 32GB or more system RAM). -
Parameters:
1.
Freq Temp
Frequency temperature. Controls the detail level of the plasma - increasing this to max gives a "bigger" wobbling plasma. Reducing it gives smaller wobbles. This parameter is like a zoom parameter.
Frequency temperature. Controls the detail level of the plasma - increasing this to max gives a "bigger" wobbling plasma. Reducing it gives smaller wobbles. This parameter is like a zoom parameter.
2.
Rot Step 1
The first of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
The first of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
3.
Rot Step 2
The second of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
The second of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
4.
Rot Step 3
The last of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
The last of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
5.
Mul1
Multiplication parameter - try this for variating the plasma shape.
Multiplication parameter - try this for variating the plasma shape.
6.
Mul2
Multiplication parameter - try this for variating the plasma shape.
Multiplication parameter - try this for variating the plasma shape.
7.
Mul3
Multiplication parameter - try this for variating the plasma shape.
Multiplication parameter - try this for variating the plasma shape.
8.
Zoom Offs X
Zoom offset horizontally (x axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
Zoom offset horizontally (x axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
9.
Zoom Offs Y
Zoom offset vertically (y axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
Zoom offset vertically (y axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
10.
Sin Mods
Lets you choose from 4 slightly different types of plasma effect.
Lets you choose from 4 slightly different types of plasma effect.
11.
FX Amount
Dry/Wet mix for the effect. Mix the input with the output gradually. Default is min, which gives only output.
Dry/Wet mix for the effect. Mix the input with the output gradually. Default is min, which gives only output.
Isc
Plasma3A
Version:
3.0
Build 0868
ID:
iw24
Parameters:
12
Inputs:
System:
PC Only
A plasma effect much like IscPlasma2 but with added influence of "difference" from the video input. It generates a plasma that is highly influenced by the video input. A even smoother output can be achieved using the last Blend parameter and blending it w New in 3.0: - 4K and 8K support for higher quality rendering (requires 32GB or more system RAM). - Alpha (transparency) processing.
Parameters:
A plasma effect much like IscPlasma2 but with added influence of "difference" from the video input. It generates a plasma that is highly influenced by the video input. A even smoother output can be achieved using the last Blend parameter and blending it w New in 3.0: - 4K and 8K support for higher quality rendering (requires 32GB or more system RAM). - Alpha (transparency) processing.
Parameters:
1.
Freq Temp
Frequency temperature. Controls the detail level of the plasma - increasing this to max gives a "bigger" wobbling plasma. Reducing it gives smaller wobbles. This parameter is like a zoom parameter.
Frequency temperature. Controls the detail level of the plasma - increasing this to max gives a "bigger" wobbling plasma. Reducing it gives smaller wobbles. This parameter is like a zoom parameter.
2.
Rot Step 1
The first of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
The first of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
3.
Rot Step 2
The second of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
The second of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
4.
Rot Step 3
The last of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
The last of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
5.
Mul1
Multiplication parameter - try this for variating the plasma shape.
Multiplication parameter - try this for variating the plasma shape.
6.
Mul2
Multiplication parameter - try this for variating the plasma shape.
Multiplication parameter - try this for variating the plasma shape.
7.
Mul3
Multiplication parameter - try this for variating the plasma shape.
Multiplication parameter - try this for variating the plasma shape.
8.
Zoom Offs X
Zoom offset horizontally (x axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
Zoom offset horizontally (x axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
9.
Zoom Offs Y
Zoom offset vertically (y axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
Zoom offset vertically (y axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
10.
Sin Mods
Lets you choose from 4 slightly different types of plasma effect.
Lets you choose from 4 slightly different types of plasma effect.
11.
Enable Alpha
Enable alpha adjustments or not.
Enable alpha adjustments or not.
12.
FX Amount
Mix of wet/dry. Default = full effect.
Mix of wet/dry. Default = full effect.
Isc Plasma4 Version: 3.0 Build 0876 ID: iz0h Parameters: 11 Inputs: System: PC Only
This plasma effect is very different from the others in its shape. But it has the same parameters as the other ones for modification. It generates a plasma that is mildly influenced by the video input. A smoother output can be achieved using the last Blen New in 3.0: - 4K and 8K support for higher quality rendering (requires 32GB or more system RAM). -
Parameters:
1.
Freq Temp
Frequency temperature. Controls the detail level of the plasma - increasing this to max gives a "bigger" wobbling plasma. Reducing it gives smaller wobbles. This parameter is like a zoom parameter.
Frequency temperature. Controls the detail level of the plasma - increasing this to max gives a "bigger" wobbling plasma. Reducing it gives smaller wobbles. This parameter is like a zoom parameter.
2.
Rot Step 1
The first of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
The first of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
3.
Rot Step 2
The second of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
The second of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
4.
Rot Step 3
The last of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
The last of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
5.
Mul1
Multiplication parameter - try this for variating the plasma shape.
Multiplication parameter - try this for variating the plasma shape.
6.
Mul2
Multiplication parameter - try this for variating the plasma shape.
Multiplication parameter - try this for variating the plasma shape.
7.
Mul3
Multiplication parameter - try this for variating the plasma shape.
Multiplication parameter - try this for variating the plasma shape.
8.
Zoom Offs X
Zoom offset horizontally (x axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
Zoom offset horizontally (x axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
9.
Zoom Offs Y
Zoom offset vertically (y axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
Zoom offset vertically (y axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
10.
Sin Mods
Lets you choose from 4 slightly different types of plasma effect.
Lets you choose from 4 slightly different types of plasma effect.
11.
FX Amount
Dry/Wet mix for the effect. Mix the input with the output gradually. Default is min, which gives only output.
Dry/Wet mix for the effect. Mix the input with the output gradually. Default is min, which gives only output.
Isc
Plasma4A
Version:
3.0
Build 0869
ID:
iw25
Parameters:
12
Inputs:
System:
PC Only
This plasma effect is very different from the others in its shape. But it has the same parameters as the other ones for modification. It generates a plasma that is mildly influenced by the video input. A smoother output can be achieved using the last Blen New in 3.0: - 4K and 8K support for higher quality rendering (requires 32GB or more system RAM). - Alpha (transparency) processing.
Parameters:
This plasma effect is very different from the others in its shape. But it has the same parameters as the other ones for modification. It generates a plasma that is mildly influenced by the video input. A smoother output can be achieved using the last Blen New in 3.0: - 4K and 8K support for higher quality rendering (requires 32GB or more system RAM). - Alpha (transparency) processing.
Parameters:
1.
Freq Temp
Frequency temperature. Controls the detail level of the plasma - increasing this to max gives a "bigger" wobbling plasma. Reducing it gives smaller wobbles. This parameter is like a zoom parameter.
Frequency temperature. Controls the detail level of the plasma - increasing this to max gives a "bigger" wobbling plasma. Reducing it gives smaller wobbles. This parameter is like a zoom parameter.
2.
Rot Step 1
The first of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
The first of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
3.
Rot Step 2
The second of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
The second of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
4.
Rot Step 3
The last of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
The last of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
5.
Mul1
Multiplication parameter - try this for variating the plasma shape.
Multiplication parameter - try this for variating the plasma shape.
6.
Mul2
Multiplication parameter - try this for variating the plasma shape.
Multiplication parameter - try this for variating the plasma shape.
7.
Mul3
Multiplication parameter - try this for variating the plasma shape.
Multiplication parameter - try this for variating the plasma shape.
8.
Zoom Offs X
Zoom offset horizontally (x axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
Zoom offset horizontally (x axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
9.
Zoom Offs Y
Zoom offset vertically (y axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
Zoom offset vertically (y axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
10.
Sin Mods
Lets you choose from 4 slightly different types of plasma effect.
Lets you choose from 4 slightly different types of plasma effect.
11.
Enable Alpha
Enable alpha adjustments or not.
Enable alpha adjustments or not.
12.
FX Amount
Mix of wet/dry. Default = full effect.
Mix of wet/dry. Default = full effect.
Isc Plasma5 Version: 3.0 Build 0872 ID: iz0i Parameters: 12 Inputs: System: PC Only
This plasma effect is also different from the others in its shape. It has the same parameters as the other ones for modification. It generates a plasma that is very strong in color-contrast and is also influenced by the video input. Higher or lower values New in 3.0: - 4K and 8K support for higher quality rendering (requires 32GB or more system RAM). -
Parameters:
1.
Freq Temp
Frequency temperature. Controls the detail level of the plasma - increasing this to max gives a "bigger" wobbling plasma. Reducing it gives smaller wobbles. This parameter is like a zoom parameter.
Frequency temperature. Controls the detail level of the plasma - increasing this to max gives a "bigger" wobbling plasma. Reducing it gives smaller wobbles. This parameter is like a zoom parameter.
2.
Rot Step 1
The first of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
The first of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
3.
Rot Step 2
The second of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
The second of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
4.
Rot Step 3
The last of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
The last of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
5.
Mul1
Multiplication parameter - try this for variating the plasma shape.
Multiplication parameter - try this for variating the plasma shape.
6.
Mul2
Multiplication parameter - try this for variating the plasma shape.
Multiplication parameter - try this for variating the plasma shape.
7.
Mul3
Multiplication parameter - try this for variating the plasma shape.
Multiplication parameter - try this for variating the plasma shape.
8.
Zoom Offs X
Zoom offset horizontally (x axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
Zoom offset horizontally (x axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
9.
Zoom Offs Y
Zoom offset vertically (y axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
Zoom offset vertically (y axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
10.
Sin Mods
Lets you choose from 4 slightly different types of plasma effect.
Lets you choose from 4 slightly different types of plasma effect.
11.
FX Amount
Dry/Wet mix for the effect. Mix the input with the output gradually. Default is min, which gives only output.
Dry/Wet mix for the effect. Mix the input with the output gradually. Default is min, which gives only output.
12.
Limit
Controls limiting (off/on) when the plasma is added to the input, if color exceeds max: cap or loop it.
Controls limiting (off/on) when the plasma is added to the input, if color exceeds max: cap or loop it.
Isc
Plasma5A
Version:
3.0
Build 0868
ID:
iw26
Parameters:
13
Inputs:
System:
PC Only
This plasma effect is also different from the others in its shape. It has the same parameters as the other ones for modification. It generates a plasma that is very strong in color-contrast and is also influenced by the video input. Higher or lower values New in 3.0: - 4K and 8K support for higher quality rendering (requires 32GB or more system RAM). - Alpha (transparency) processing.
Parameters:
This plasma effect is also different from the others in its shape. It has the same parameters as the other ones for modification. It generates a plasma that is very strong in color-contrast and is also influenced by the video input. Higher or lower values New in 3.0: - 4K and 8K support for higher quality rendering (requires 32GB or more system RAM). - Alpha (transparency) processing.
Parameters:
1.
Freq Temp
Frequency temperature. Controls the detail level of the plasma - increasing this to max gives a "bigger" wobbling plasma. Reducing it gives smaller wobbles. This parameter is like a zoom parameter.
Frequency temperature. Controls the detail level of the plasma - increasing this to max gives a "bigger" wobbling plasma. Reducing it gives smaller wobbles. This parameter is like a zoom parameter.
2.
Rot Step 1
The first of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
The first of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
3.
Rot Step 2
The second of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
The second of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
4.
Rot Step 3
The last of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
The last of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
5.
Mul1
Multiplication parameter - try this for variating the plasma shape.
Multiplication parameter - try this for variating the plasma shape.
6.
Mul2
Multiplication parameter - try this for variating the plasma shape.
Multiplication parameter - try this for variating the plasma shape.
7.
Mul3
Multiplication parameter - try this for variating the plasma shape.
Multiplication parameter - try this for variating the plasma shape.
8.
Zoom Offs X
Zoom offset horizontally (x axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
Zoom offset horizontally (x axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
9.
Zoom Offs Y
Zoom offset vertically (y axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
Zoom offset vertically (y axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
10.
Sin Mods
Dry/Wet mix for the effect. Mix the input with the output gradually. Default is min, which gives only output.
Dry/Wet mix for the effect. Mix the input with the output gradually. Default is min, which gives only output.
11.
Limit
Controls limiting (off/on) when the plasma is added to the input, if color exceeds max: cap or loop it.
Controls limiting (off/on) when the plasma is added to the input, if color exceeds max: cap or loop it.
12.
Enable Alpha
Enable alpha adjustments or not.
Enable alpha adjustments or not.
13.
FX Amount
Mix of wet/dry. Default = full effect.
Mix of wet/dry. Default = full effect.
Isc PlasmaNoise1 Version: 3.0 Build 0922 ID: iz0j Parameters: 13 Inputs: System: PC Only
Liquid plasma, very dynamic due to its randomness and animation from noise added to lookup tables. Version 1 of 3.\r\n New in 3.0: - 4K and 8K support for higher quality rendering (requires 32GB or more system RAM). - Better parameter defaults
Parameters:
1.
Freq Temp
Frequency temperature. Controls the detail level of the plasma - increasing this to max gives a "bigger" wobbling plasma. Reducing it gives smaller wobbles. This parameter is like a zoom parameter.
Frequency temperature. Controls the detail level of the plasma - increasing this to max gives a "bigger" wobbling plasma. Reducing it gives smaller wobbles. This parameter is like a zoom parameter.
2.
Rot Step 1
The first of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
The first of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
3.
Rot Step 2
The second of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
The second of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
4.
Rot Step 3
The last of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
The last of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
5.
Mul1
Multiplication parameter - try this for variating the plasma shape.
Multiplication parameter - try this for variating the plasma shape.
6.
Mul2
Multiplication parameter - try this for variating the plasma shape.
Multiplication parameter - try this for variating the plasma shape.
7.
Mul3
Multiplication parameter - try this for variating the plasma shape.
Multiplication parameter - try this for variating the plasma shape.
8.
Zoom Offs X
Zoom offset horizontally (x axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
Zoom offset horizontally (x axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
9.
Zoom Offs Y
Zoom offset vertically (y axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
Zoom offset vertically (y axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
10.
Sin Mods
Lets you choose from 4 slightly different types of plasma effect.
Lets you choose from 4 slightly different types of plasma effect.
11.
Random Seed
With this parameter you can set 1000 different fixed random seeds, to recreate same animation in the noise the value is calculated as (parameter value * 1000.0)^2 (squared).
With this parameter you can set 1000 different fixed random seeds, to recreate same animation in the noise the value is calculated as (parameter value * 1000.0)^2 (squared).
12.
Blend
Dry/Wet mix for the effect. Mix the input with the output gradually. Default is min, which gives only output.
Dry/Wet mix for the effect. Mix the input with the output gradually. Default is min, which gives only output.
13.
Bleed
Switch > 0.5 gives input + plasma processed. <= 0.5 gives input multiplied with plasma processed and capped at zero and max color component values.
Switch > 0.5 gives input + plasma processed. <= 0.5 gives input multiplied with plasma processed and capped at zero and max color component values.
Isc PlasmaNoise2 Version: 3.0 Build 0871 ID: iz0k Parameters: 12 Inputs: System: PC Only
Liquid plasma, very dynamic due to its randomness and animation from noise added to lookup tables. Version 2 of 3. New in 3.0: - 4K and 8K support for higher quality rendering (requires 32GB or more system RAM). - Better parameter defaults
Parameters:
1.
Freq Temp
Frequency temperature. Controls the detail level of the plasma - increasing this to max gives a "bigger" wobbling plasma. Reducing it gives smaller wobbles. This parameter is like a zoom parameter.
Frequency temperature. Controls the detail level of the plasma - increasing this to max gives a "bigger" wobbling plasma. Reducing it gives smaller wobbles. This parameter is like a zoom parameter.
2.
Rot Step 1
The first of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
The first of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
3.
Rot Step 2
The second of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
The second of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
4.
Rot Step 3
The last of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
The last of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
5.
Mul1
Multiplication parameter - try this for variating the plasma shape.
Multiplication parameter - try this for variating the plasma shape.
6.
Mul2
Multiplication parameter - try this for variating the plasma shape.
Multiplication parameter - try this for variating the plasma shape.
7.
Mul3
Multiplication parameter - try this for variating the plasma shape.
Multiplication parameter - try this for variating the plasma shape.
8.
Zoom Offs X
Zoom offset horizontally (x axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
Zoom offset horizontally (x axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
9.
Zoom Offs Y
Zoom offset vertically (y axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
Zoom offset vertically (y axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
10.
Sin Mods
Lets you choose from 4 slightly different types of plasma effect.
Lets you choose from 4 slightly different types of plasma effect.
11.
Random Seed
With this parameter you can set 1000 different fixed random seeds, to recreate same animation in the noise the value is calculated as (parameter value * 1000.0)^2 (squared).
With this parameter you can set 1000 different fixed random seeds, to recreate same animation in the noise the value is calculated as (parameter value * 1000.0)^2 (squared).
12.
Blend
Dry/Wet mix for the effect. Mix the input with the output gradually. Default is min, which gives only output.
Dry/Wet mix for the effect. Mix the input with the output gradually. Default is min, which gives only output.
Isc PlasmaNoise3 Version: 3.0 Build 0866 ID: iz0l Parameters: 12 Inputs: System: PC Only
Liquid plasma, very dynamic due to its randomness and animation from noise added to lookup tables. Version 3 of 3.\r\n New in 3.0: - 4K and 8K support for higher quality rendering (requires 32GB or more system RAM). -
Parameters:
1.
Freq Temp
Frequency temperature. Controls the detail level of the plasma - increasing this to max gives a "bigger" wobbling plasma. Reducing it gives smaller wobbles. This parameter is like a zoom parameter.
Frequency temperature. Controls the detail level of the plasma - increasing this to max gives a "bigger" wobbling plasma. Reducing it gives smaller wobbles. This parameter is like a zoom parameter.
2.
Rot Step 1
The first of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
The first of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
3.
Rot Step 2
The second of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
The second of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
4.
Rot Step 3
The last of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
The last of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
5.
Mul1
Multiplication parameter - try this for variating the plasma shape.
Multiplication parameter - try this for variating the plasma shape.
6.
Mul2
Multiplication parameter - try this for variating the plasma shape.
Multiplication parameter - try this for variating the plasma shape.
7.
Mul3
Multiplication parameter - try this for variating the plasma shape.
Multiplication parameter - try this for variating the plasma shape.
8.
Zoom Offs X
Zoom offset horizontally (x axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
Zoom offset horizontally (x axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
9.
Zoom Offs Y
Zoom offset vertically (y axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
Zoom offset vertically (y axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
10.
Sin Mods
Lets you choose from 4 slightly different types of plasma effect.
Lets you choose from 4 slightly different types of plasma effect.
11.
Random Seed
With this parameter you can set 1000 different fixed random seeds, to recreate same animation in the noise the value is calculated as (parameter value * 1000.0)^2 (squared).
With this parameter you can set 1000 different fixed random seeds, to recreate same animation in the noise the value is calculated as (parameter value * 1000.0)^2 (squared).
12.
FX Amount
Dry/Wet mix for the effect. Mix the input with the output gradually. Default is min, which gives only output.
Dry/Wet mix for the effect. Mix the input with the output gradually. Default is min, which gives only output.