IntrinsicFX Plasma Plasma
- Details
- Category: Plugin Packs
- Last Updated: 14 January 2017
- Hits: 2903
Now free download!
If you like them, donations are welcome as I might make more plugins.
IntrinsicFX Plasma Plasma Version: 3.0 (28.04.2017)   (PC / Windows)   1,098 downloads.   Modified: 2017-04-28
Isc Plasma1 Version: 3.0 Build 0879 ID: iz0e Parameters: 12 Inputs: System: PC Only
Extra wild plasma effect. It generates a high contrast plasma and this is influenced by the video input. A more subtle output can be achieved using the last Blend parameter and blending it wet/dry with the input. Higher or lower values than the middle of New in 3.0: - 4K and 8K support for higher quality rendering (requires 32GB or more system RAM). -
Parameters:
1.
Freq Temp
Frequency temperature. Controls the detail level of the plasma - increasing this to max gives a "bigger" wobbling plasma. Reducing it gives smaller wobbles. This parameter is like a zoom parameter.
Frequency temperature. Controls the detail level of the plasma - increasing this to max gives a "bigger" wobbling plasma. Reducing it gives smaller wobbles. This parameter is like a zoom parameter.
2.
Rot Step 1
The first of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
The first of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
3.
Rot Step 2
The second of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
The second of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
4.
Rot Step 3
The last of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
The last of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
5.
Mul1
Multiplication parameter - try this for variating the plasma shape.
Multiplication parameter - try this for variating the plasma shape.
6.
Mul2
Multiplication parameter - try this for variating the plasma shape.
Multiplication parameter - try this for variating the plasma shape.
7.
Mul3
Multiplication parameter - try this for variating the plasma shape.
Multiplication parameter - try this for variating the plasma shape.
8.
Zoom Offs X
Zoom offset horizontally (x axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
Zoom offset horizontally (x axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
9.
Zoom Offs Y
Zoom offset vertically (y axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
Zoom offset vertically (y axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
10.
Sin Mods
Lets you choose from 4 slightly different types of plasma effect.
Lets you choose from 4 slightly different types of plasma effect.
11.
FX Amount
Dry/Wet mix for the effect. Mix the input with the output gradually. Default is min, which gives only output.
Dry/Wet mix for the effect. Mix the input with the output gradually. Default is min, which gives only output.
12.
Limit
Controls limiting (off/on) when the plasma is added to the input, if color exceeds max: cap or loop it.
Controls limiting (off/on) when the plasma is added to the input, if color exceeds max: cap or loop it.
Isc
Plasma1A
Version:
3.0
Build 0859
ID:
iw31
Parameters:
13
Inputs:
System:
PC Only
Extra wild plasma effect. It generates a high contrast plasma and this is influenced by the video input. A more subtle output can be achieved using the last Blend parameter and blending it wet/dry with the input. Higher or lower values than the middle of New in 3.0: - 4K and 8K support for higher quality rendering (requires 32GB or more system RAM). - Alpha (transparency) processing.
Parameters:
Extra wild plasma effect. It generates a high contrast plasma and this is influenced by the video input. A more subtle output can be achieved using the last Blend parameter and blending it wet/dry with the input. Higher or lower values than the middle of New in 3.0: - 4K and 8K support for higher quality rendering (requires 32GB or more system RAM). - Alpha (transparency) processing.
Parameters:
1.
Freq Temp
Frequency temperature. Controls the detail level of the plasma - increasing this to max gives a "bigger" wobbling plasma. Reducing it gives smaller wobbles. This parameter is like a zoom parameter.
Frequency temperature. Controls the detail level of the plasma - increasing this to max gives a "bigger" wobbling plasma. Reducing it gives smaller wobbles. This parameter is like a zoom parameter.
2.
Rot Step 1
The first of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
The first of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
3.
Rot Step 2
The second of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
The second of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
4.
Rot Step 3
The last of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
The last of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
5.
Mul1
Multiplication parameter - try this for variating the plasma shape.
Multiplication parameter - try this for variating the plasma shape.
6.
Mul2
Multiplication parameter - try this for variating the plasma shape.
Multiplication parameter - try this for variating the plasma shape.
7.
Mul3
Multiplication parameter - try this for variating the plasma shape.
Multiplication parameter - try this for variating the plasma shape.
8.
Zoom Offs X
Zoom offset horizontally (x axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
Zoom offset horizontally (x axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
9.
Zoom Offs Y
Zoom offset vertically (y axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
Zoom offset vertically (y axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
10.
Sin Mods
Lets you choose from 4 slightly different types of plasma effect.
Lets you choose from 4 slightly different types of plasma effect.
11.
Limit
Controls limiting (off/on) when the plasma is added to the input, if color exceeds max: cap or loop it.
Controls limiting (off/on) when the plasma is added to the input, if color exceeds max: cap or loop it.
12.
Enable Alpha
Enable alpha adjustments or not.
Enable alpha adjustments or not.
13.
FX Amount
Mix of wet/dry. Default = full effect.
Mix of wet/dry. Default = full effect.
Isc Plasma2 Version: 3.0 Build 0872 ID: iz0f Parameters: 11 Inputs: System: PC Only
A slightly more subtle plasma effect. It generates a smooth plasma and this is influenced by the video input. A even smoother output can be achieved using the last Blend parameter and blending it wet/dry with the input. Higher or lower values than the mid New in 3.0: - 4K and 8K support for higher quality rendering (requires 32GB or more system RAM). -
Parameters:
1.
Freq Temp
Frequency temperature. Controls the detail level of the plasma - increasing this to max gives a "bigger" wobbling plasma. Reducing it gives smaller wobbles. This parameter is like a zoom parameter.
Frequency temperature. Controls the detail level of the plasma - increasing this to max gives a "bigger" wobbling plasma. Reducing it gives smaller wobbles. This parameter is like a zoom parameter.
2.
Rot Step 1
The first of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
The first of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
3.
Rot Step 2
The second of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
The second of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
4.
Rot Step 3
The last of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
The last of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
5.
Mul1
Multiplication parameter - try this for variating the plasma shape.
Multiplication parameter - try this for variating the plasma shape.
6.
Mul2
Multiplication parameter - try this for variating the plasma shape.
Multiplication parameter - try this for variating the plasma shape.
7.
Mul3
Multiplication parameter - try this for variating the plasma shape.
Multiplication parameter - try this for variating the plasma shape.
8.
Zoom Offs X
Zoom offset horizontally (x axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
Zoom offset horizontally (x axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
9.
Zoom Offs Y
Zoom offset vertically (y axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
Zoom offset vertically (y axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
10.
Sin Mods
Lets you choose from 4 slightly different types of plasma effect.
Lets you choose from 4 slightly different types of plasma effect.
11.
FX Amount
Dry/Wet mix for the effect. Mix the input with the output gradually. Default is min, which gives only output.
Dry/Wet mix for the effect. Mix the input with the output gradually. Default is min, which gives only output.
Isc
Plasma2A
Version:
3.0
Build 0867
ID:
iw23
Parameters:
12
Inputs:
System:
PC Only
A slightly more subtle plasma effect. It generates a smooth plasma and this is influenced by the video input. A even smoother output can be achieved using the last Blend parameter and blending it wet/dry with the input. Higher or lower values than the mid New in 3.0: - 4K and 8K support for higher quality rendering (requires 32GB or more system RAM). - Alpha (transparency) processing.
Parameters:
A slightly more subtle plasma effect. It generates a smooth plasma and this is influenced by the video input. A even smoother output can be achieved using the last Blend parameter and blending it wet/dry with the input. Higher or lower values than the mid New in 3.0: - 4K and 8K support for higher quality rendering (requires 32GB or more system RAM). - Alpha (transparency) processing.
Parameters:
1.
Freq Temp
Frequency temperature. Controls the detail level of the plasma - increasing this to max gives a "bigger" wobbling plasma. Reducing it gives smaller wobbles. This parameter is like a zoom parameter.
Frequency temperature. Controls the detail level of the plasma - increasing this to max gives a "bigger" wobbling plasma. Reducing it gives smaller wobbles. This parameter is like a zoom parameter.
2.
Rot Step 1
The first of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
The first of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
3.
Rot Step 2
The second of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
The second of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
4.
Rot Step 3
The last of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
The last of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
5.
Mul1
Multiplication parameter - try this for variating the plasma shape.
Multiplication parameter - try this for variating the plasma shape.
6.
Mul2
Multiplication parameter - try this for variating the plasma shape.
Multiplication parameter - try this for variating the plasma shape.
7.
Mul3
Multiplication parameter - try this for variating the plasma shape.
Multiplication parameter - try this for variating the plasma shape.
8.
Zoom Offs X
Zoom offset horizontally (x axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
Zoom offset horizontally (x axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
9.
Zoom Offs Y
Zoom offset vertically (y axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
Zoom offset vertically (y axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
10.
Sin Mods
Lets you choose from 4 slightly different types of plasma effect.
Lets you choose from 4 slightly different types of plasma effect.
11.
Enable Alpha
Enable alpha adjustments or not.
Enable alpha adjustments or not.
12.
FX Amount
Mix of wet/dry. Default = full effect.
Mix of wet/dry. Default = full effect.
Isc Plasma3 Version: 3.0 Build 0877 ID: iz0g Parameters: 11 Inputs: System: PC Only
A plasma effect much like IscPlasma2 but with added influence of "difference" from the video input. It generates a plasma that is highly influenced by the video input. A even smoother output can be achieved using the last Blend parameter and blending it w New in 3.0: - 4K and 8K support for higher quality rendering (requires 32GB or more system RAM). -
Parameters:
1.
Freq Temp
Frequency temperature. Controls the detail level of the plasma - increasing this to max gives a "bigger" wobbling plasma. Reducing it gives smaller wobbles. This parameter is like a zoom parameter.
Frequency temperature. Controls the detail level of the plasma - increasing this to max gives a "bigger" wobbling plasma. Reducing it gives smaller wobbles. This parameter is like a zoom parameter.
2.
Rot Step 1
The first of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
The first of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
3.
Rot Step 2
The second of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
The second of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
4.
Rot Step 3
The last of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
The last of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
5.
Mul1
Multiplication parameter - try this for variating the plasma shape.
Multiplication parameter - try this for variating the plasma shape.
6.
Mul2
Multiplication parameter - try this for variating the plasma shape.
Multiplication parameter - try this for variating the plasma shape.
7.
Mul3
Multiplication parameter - try this for variating the plasma shape.
Multiplication parameter - try this for variating the plasma shape.
8.
Zoom Offs X
Zoom offset horizontally (x axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
Zoom offset horizontally (x axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
9.
Zoom Offs Y
Zoom offset vertically (y axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
Zoom offset vertically (y axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
10.
Sin Mods
Lets you choose from 4 slightly different types of plasma effect.
Lets you choose from 4 slightly different types of plasma effect.
11.
FX Amount
Dry/Wet mix for the effect. Mix the input with the output gradually. Default is min, which gives only output.
Dry/Wet mix for the effect. Mix the input with the output gradually. Default is min, which gives only output.
Isc
Plasma3A
Version:
3.0
Build 0868
ID:
iw24
Parameters:
12
Inputs:
System:
PC Only
A plasma effect much like IscPlasma2 but with added influence of "difference" from the video input. It generates a plasma that is highly influenced by the video input. A even smoother output can be achieved using the last Blend parameter and blending it w New in 3.0: - 4K and 8K support for higher quality rendering (requires 32GB or more system RAM). - Alpha (transparency) processing.
Parameters:
A plasma effect much like IscPlasma2 but with added influence of "difference" from the video input. It generates a plasma that is highly influenced by the video input. A even smoother output can be achieved using the last Blend parameter and blending it w New in 3.0: - 4K and 8K support for higher quality rendering (requires 32GB or more system RAM). - Alpha (transparency) processing.
Parameters:
1.
Freq Temp
Frequency temperature. Controls the detail level of the plasma - increasing this to max gives a "bigger" wobbling plasma. Reducing it gives smaller wobbles. This parameter is like a zoom parameter.
Frequency temperature. Controls the detail level of the plasma - increasing this to max gives a "bigger" wobbling plasma. Reducing it gives smaller wobbles. This parameter is like a zoom parameter.
2.
Rot Step 1
The first of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
The first of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
3.
Rot Step 2
The second of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
The second of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
4.
Rot Step 3
The last of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
The last of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
5.
Mul1
Multiplication parameter - try this for variating the plasma shape.
Multiplication parameter - try this for variating the plasma shape.
6.
Mul2
Multiplication parameter - try this for variating the plasma shape.
Multiplication parameter - try this for variating the plasma shape.
7.
Mul3
Multiplication parameter - try this for variating the plasma shape.
Multiplication parameter - try this for variating the plasma shape.
8.
Zoom Offs X
Zoom offset horizontally (x axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
Zoom offset horizontally (x axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
9.
Zoom Offs Y
Zoom offset vertically (y axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
Zoom offset vertically (y axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
10.
Sin Mods
Lets you choose from 4 slightly different types of plasma effect.
Lets you choose from 4 slightly different types of plasma effect.
11.
Enable Alpha
Enable alpha adjustments or not.
Enable alpha adjustments or not.
12.
FX Amount
Mix of wet/dry. Default = full effect.
Mix of wet/dry. Default = full effect.
Isc Plasma4 Version: 3.0 Build 0876 ID: iz0h Parameters: 11 Inputs: System: PC Only
This plasma effect is very different from the others in its shape. But it has the same parameters as the other ones for modification. It generates a plasma that is mildly influenced by the video input. A smoother output can be achieved using the last Blen New in 3.0: - 4K and 8K support for higher quality rendering (requires 32GB or more system RAM). -
Parameters:
1.
Freq Temp
Frequency temperature. Controls the detail level of the plasma - increasing this to max gives a "bigger" wobbling plasma. Reducing it gives smaller wobbles. This parameter is like a zoom parameter.
Frequency temperature. Controls the detail level of the plasma - increasing this to max gives a "bigger" wobbling plasma. Reducing it gives smaller wobbles. This parameter is like a zoom parameter.
2.
Rot Step 1
The first of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
The first of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
3.
Rot Step 2
The second of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
The second of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
4.
Rot Step 3
The last of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
The last of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
5.
Mul1
Multiplication parameter - try this for variating the plasma shape.
Multiplication parameter - try this for variating the plasma shape.
6.
Mul2
Multiplication parameter - try this for variating the plasma shape.
Multiplication parameter - try this for variating the plasma shape.
7.
Mul3
Multiplication parameter - try this for variating the plasma shape.
Multiplication parameter - try this for variating the plasma shape.
8.
Zoom Offs X
Zoom offset horizontally (x axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
Zoom offset horizontally (x axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
9.
Zoom Offs Y
Zoom offset vertically (y axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
Zoom offset vertically (y axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
10.
Sin Mods
Lets you choose from 4 slightly different types of plasma effect.
Lets you choose from 4 slightly different types of plasma effect.
11.
FX Amount
Dry/Wet mix for the effect. Mix the input with the output gradually. Default is min, which gives only output.
Dry/Wet mix for the effect. Mix the input with the output gradually. Default is min, which gives only output.
Isc
Plasma4A
Version:
3.0
Build 0869
ID:
iw25
Parameters:
12
Inputs:
System:
PC Only
This plasma effect is very different from the others in its shape. But it has the same parameters as the other ones for modification. It generates a plasma that is mildly influenced by the video input. A smoother output can be achieved using the last Blen New in 3.0: - 4K and 8K support for higher quality rendering (requires 32GB or more system RAM). - Alpha (transparency) processing.
Parameters:
This plasma effect is very different from the others in its shape. But it has the same parameters as the other ones for modification. It generates a plasma that is mildly influenced by the video input. A smoother output can be achieved using the last Blen New in 3.0: - 4K and 8K support for higher quality rendering (requires 32GB or more system RAM). - Alpha (transparency) processing.
Parameters:
1.
Freq Temp
Frequency temperature. Controls the detail level of the plasma - increasing this to max gives a "bigger" wobbling plasma. Reducing it gives smaller wobbles. This parameter is like a zoom parameter.
Frequency temperature. Controls the detail level of the plasma - increasing this to max gives a "bigger" wobbling plasma. Reducing it gives smaller wobbles. This parameter is like a zoom parameter.
2.
Rot Step 1
The first of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
The first of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
3.
Rot Step 2
The second of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
The second of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
4.
Rot Step 3
The last of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
The last of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
5.
Mul1
Multiplication parameter - try this for variating the plasma shape.
Multiplication parameter - try this for variating the plasma shape.
6.
Mul2
Multiplication parameter - try this for variating the plasma shape.
Multiplication parameter - try this for variating the plasma shape.
7.
Mul3
Multiplication parameter - try this for variating the plasma shape.
Multiplication parameter - try this for variating the plasma shape.
8.
Zoom Offs X
Zoom offset horizontally (x axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
Zoom offset horizontally (x axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
9.
Zoom Offs Y
Zoom offset vertically (y axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
Zoom offset vertically (y axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
10.
Sin Mods
Lets you choose from 4 slightly different types of plasma effect.
Lets you choose from 4 slightly different types of plasma effect.
11.
Enable Alpha
Enable alpha adjustments or not.
Enable alpha adjustments or not.
12.
FX Amount
Mix of wet/dry. Default = full effect.
Mix of wet/dry. Default = full effect.
Isc Plasma5 Version: 3.0 Build 0872 ID: iz0i Parameters: 12 Inputs: System: PC Only
This plasma effect is also different from the others in its shape. It has the same parameters as the other ones for modification. It generates a plasma that is very strong in color-contrast and is also influenced by the video input. Higher or lower values New in 3.0: - 4K and 8K support for higher quality rendering (requires 32GB or more system RAM). -
Parameters:
1.
Freq Temp
Frequency temperature. Controls the detail level of the plasma - increasing this to max gives a "bigger" wobbling plasma. Reducing it gives smaller wobbles. This parameter is like a zoom parameter.
Frequency temperature. Controls the detail level of the plasma - increasing this to max gives a "bigger" wobbling plasma. Reducing it gives smaller wobbles. This parameter is like a zoom parameter.
2.
Rot Step 1
The first of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
The first of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
3.
Rot Step 2
The second of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
The second of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
4.
Rot Step 3
The last of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
The last of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
5.
Mul1
Multiplication parameter - try this for variating the plasma shape.
Multiplication parameter - try this for variating the plasma shape.
6.
Mul2
Multiplication parameter - try this for variating the plasma shape.
Multiplication parameter - try this for variating the plasma shape.
7.
Mul3
Multiplication parameter - try this for variating the plasma shape.
Multiplication parameter - try this for variating the plasma shape.
8.
Zoom Offs X
Zoom offset horizontally (x axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
Zoom offset horizontally (x axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
9.
Zoom Offs Y
Zoom offset vertically (y axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
Zoom offset vertically (y axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
10.
Sin Mods
Lets you choose from 4 slightly different types of plasma effect.
Lets you choose from 4 slightly different types of plasma effect.
11.
FX Amount
Dry/Wet mix for the effect. Mix the input with the output gradually. Default is min, which gives only output.
Dry/Wet mix for the effect. Mix the input with the output gradually. Default is min, which gives only output.
12.
Limit
Controls limiting (off/on) when the plasma is added to the input, if color exceeds max: cap or loop it.
Controls limiting (off/on) when the plasma is added to the input, if color exceeds max: cap or loop it.
Isc
Plasma5A
Version:
3.0
Build 0868
ID:
iw26
Parameters:
13
Inputs:
System:
PC Only
This plasma effect is also different from the others in its shape. It has the same parameters as the other ones for modification. It generates a plasma that is very strong in color-contrast and is also influenced by the video input. Higher or lower values New in 3.0: - 4K and 8K support for higher quality rendering (requires 32GB or more system RAM). - Alpha (transparency) processing.
Parameters:
This plasma effect is also different from the others in its shape. It has the same parameters as the other ones for modification. It generates a plasma that is very strong in color-contrast and is also influenced by the video input. Higher or lower values New in 3.0: - 4K and 8K support for higher quality rendering (requires 32GB or more system RAM). - Alpha (transparency) processing.
Parameters:
1.
Freq Temp
Frequency temperature. Controls the detail level of the plasma - increasing this to max gives a "bigger" wobbling plasma. Reducing it gives smaller wobbles. This parameter is like a zoom parameter.
Frequency temperature. Controls the detail level of the plasma - increasing this to max gives a "bigger" wobbling plasma. Reducing it gives smaller wobbles. This parameter is like a zoom parameter.
2.
Rot Step 1
The first of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
The first of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
3.
Rot Step 2
The second of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
The second of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
4.
Rot Step 3
The last of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
The last of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
5.
Mul1
Multiplication parameter - try this for variating the plasma shape.
Multiplication parameter - try this for variating the plasma shape.
6.
Mul2
Multiplication parameter - try this for variating the plasma shape.
Multiplication parameter - try this for variating the plasma shape.
7.
Mul3
Multiplication parameter - try this for variating the plasma shape.
Multiplication parameter - try this for variating the plasma shape.
8.
Zoom Offs X
Zoom offset horizontally (x axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
Zoom offset horizontally (x axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
9.
Zoom Offs Y
Zoom offset vertically (y axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
Zoom offset vertically (y axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
10.
Sin Mods
Dry/Wet mix for the effect. Mix the input with the output gradually. Default is min, which gives only output.
Dry/Wet mix for the effect. Mix the input with the output gradually. Default is min, which gives only output.
11.
Limit
Controls limiting (off/on) when the plasma is added to the input, if color exceeds max: cap or loop it.
Controls limiting (off/on) when the plasma is added to the input, if color exceeds max: cap or loop it.
12.
Enable Alpha
Enable alpha adjustments or not.
Enable alpha adjustments or not.
13.
FX Amount
Mix of wet/dry. Default = full effect.
Mix of wet/dry. Default = full effect.
Isc PlasmaNoise1 Version: 3.0 Build 0922 ID: iz0j Parameters: 13 Inputs: System: PC Only
Liquid plasma, very dynamic due to its randomness and animation from noise added to lookup tables. Version 1 of 3.\r\n New in 3.0: - 4K and 8K support for higher quality rendering (requires 32GB or more system RAM). - Better parameter defaults
Parameters:
1.
Freq Temp
Frequency temperature. Controls the detail level of the plasma - increasing this to max gives a "bigger" wobbling plasma. Reducing it gives smaller wobbles. This parameter is like a zoom parameter.
Frequency temperature. Controls the detail level of the plasma - increasing this to max gives a "bigger" wobbling plasma. Reducing it gives smaller wobbles. This parameter is like a zoom parameter.
2.
Rot Step 1
The first of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
The first of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
3.
Rot Step 2
The second of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
The second of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
4.
Rot Step 3
The last of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
The last of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
5.
Mul1
Multiplication parameter - try this for variating the plasma shape.
Multiplication parameter - try this for variating the plasma shape.
6.
Mul2
Multiplication parameter - try this for variating the plasma shape.
Multiplication parameter - try this for variating the plasma shape.
7.
Mul3
Multiplication parameter - try this for variating the plasma shape.
Multiplication parameter - try this for variating the plasma shape.
8.
Zoom Offs X
Zoom offset horizontally (x axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
Zoom offset horizontally (x axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
9.
Zoom Offs Y
Zoom offset vertically (y axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
Zoom offset vertically (y axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
10.
Sin Mods
Lets you choose from 4 slightly different types of plasma effect.
Lets you choose from 4 slightly different types of plasma effect.
11.
Random Seed
With this parameter you can set 1000 different fixed random seeds, to recreate same animation in the noise data: the value is calculated as (parameter value * 1000.0)^2 (squared).
With this parameter you can set 1000 different fixed random seeds, to recreate same animation in the noise data: the value is calculated as (parameter value * 1000.0)^2 (squared).
12.
Blend
Dry/Wet mix for the effect. Mix the input with the output gradually. Default is min, which gives only output.
Dry/Wet mix for the effect. Mix the input with the output gradually. Default is min, which gives only output.
13.
Bleed
Switch > 0.5 gives input + plasma processed. <= 0.5 gives input multiplied with plasma processed and capped at zero and max color component values.
Switch > 0.5 gives input + plasma processed. <= 0.5 gives input multiplied with plasma processed and capped at zero and max color component values.
Isc PlasmaNoise2 Version: 3.0 Build 0871 ID: iz0k Parameters: 12 Inputs: System: PC Only
Liquid plasma, very dynamic due to its randomness and animation from noise added to lookup tables. Version 2 of 3. New in 3.0: - 4K and 8K support for higher quality rendering (requires 32GB or more system RAM). - Better parameter defaults
Parameters:
1.
Freq Temp
Frequency temperature. Controls the detail level of the plasma - increasing this to max gives a "bigger" wobbling plasma. Reducing it gives smaller wobbles. This parameter is like a zoom parameter.
Frequency temperature. Controls the detail level of the plasma - increasing this to max gives a "bigger" wobbling plasma. Reducing it gives smaller wobbles. This parameter is like a zoom parameter.
2.
Rot Step 1
The first of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
The first of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
3.
Rot Step 2
The second of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
The second of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
4.
Rot Step 3
The last of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
The last of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
5.
Mul1
Multiplication parameter - try this for variating the plasma shape.
Multiplication parameter - try this for variating the plasma shape.
6.
Mul2
Multiplication parameter - try this for variating the plasma shape.
Multiplication parameter - try this for variating the plasma shape.
7.
Mul3
Multiplication parameter - try this for variating the plasma shape.
Multiplication parameter - try this for variating the plasma shape.
8.
Zoom Offs X
Zoom offset horizontally (x axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
Zoom offset horizontally (x axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
9.
Zoom Offs Y
Zoom offset vertically (y axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
Zoom offset vertically (y axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
10.
Sin Mods
Lets you choose from 4 slightly different types of plasma effect.
Lets you choose from 4 slightly different types of plasma effect.
11.
Random Seed
With this parameter you can set 1000 different fixed random seeds, to recreate same animation in the noise data: the value is calculated as (parameter value * 1000.0)^2 (squared).
With this parameter you can set 1000 different fixed random seeds, to recreate same animation in the noise data: the value is calculated as (parameter value * 1000.0)^2 (squared).
12.
Blend
Dry/Wet mix for the effect. Mix the input with the output gradually. Default is min, which gives only output.
Dry/Wet mix for the effect. Mix the input with the output gradually. Default is min, which gives only output.
Isc PlasmaNoise3 Version: 3.0 Build 0866 ID: iz0l Parameters: 12 Inputs: System: PC Only
Liquid plasma, very dynamic due to its randomness and animation from noise added to lookup tables. Version 3 of 3.\r\n New in 3.0: - 4K and 8K support for higher quality rendering (requires 32GB or more system RAM). -
Parameters:
1.
Freq Temp
Frequency temperature. Controls the detail level of the plasma - increasing this to max gives a "bigger" wobbling plasma. Reducing it gives smaller wobbles. This parameter is like a zoom parameter.
Frequency temperature. Controls the detail level of the plasma - increasing this to max gives a "bigger" wobbling plasma. Reducing it gives smaller wobbles. This parameter is like a zoom parameter.
2.
Rot Step 1
The first of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
The first of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
3.
Rot Step 2
The second of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
The second of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
4.
Rot Step 3
The last of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
The last of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
5.
Mul1
Multiplication parameter - try this for variating the plasma shape.
Multiplication parameter - try this for variating the plasma shape.
6.
Mul2
Multiplication parameter - try this for variating the plasma shape.
Multiplication parameter - try this for variating the plasma shape.
7.
Mul3
Multiplication parameter - try this for variating the plasma shape.
Multiplication parameter - try this for variating the plasma shape.
8.
Zoom Offs X
Zoom offset horizontally (x axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
Zoom offset horizontally (x axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
9.
Zoom Offs Y
Zoom offset vertically (y axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
Zoom offset vertically (y axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
10.
Sin Mods
Lets you choose from 4 slightly different types of plasma effect.
Lets you choose from 4 slightly different types of plasma effect.
11.
Random Seed
With this parameter you can set 1000 different fixed random seeds, to recreate same animation in the noise data: the value is calculated as (parameter value * 1000.0)^2 (squared).
With this parameter you can set 1000 different fixed random seeds, to recreate same animation in the noise data: the value is calculated as (parameter value * 1000.0)^2 (squared).
12.
FX Amount
Dry/Wet mix for the effect. Mix the input with the output gradually. Default is min, which gives only output.
Dry/Wet mix for the effect. Mix the input with the output gradually. Default is min, which gives only output.